基于Green-Naghdi模型与三相延迟模型的耦合热弹性波传播

研究了基于G-N模型与三项延迟模型的热弹性波的传播特征.在各种广义热弹性理论中,热位移概念的引入使得G-N模型具有独特性质而引起广泛的关注和应用.基于G-N模型,最近一个三相延迟模型被提出.主要研究了这两种模型下第一和第二声波(耦合热弹性波)的色散和衰减特性,分析了温度场和位移场在两种模型下的振幅比和相位差.结果发现三相延迟模型更为通用和灵活,应得到更多的关注与应用.     

Momentum and heat transfer of a special case of the unsteady stagnation-point flow

This paper investigates the unsteady stagnation-point flow and heat transfer over a moving plate with mass transfer,which is also an exact solution to the unsteady Navier-Stokes(NS)equations.The boundary layer energy equation is solved with the closed form solutions for prescribed wall temperature and prescribed wall heat flux conditions.The wall temperature and heat flux have power dependence on both time and spatial distance.The solution domain,the velocity distribution,the flow field,and the temperature distribution in the fluids are studied for different controlling parameters.These parameters include the Prandtl number,the mass transfer parameter at the wall,the wall moving parameter,the time power index,and the spatial power index.It is found that two solution branches exist for certain combinations of the controlling parameters for the flow and heat transfer problems.The heat transfer solutions are given by the confluent hypergeometric function of the first kind,which can be simplified into the incomplete gamma functions for special conditions.The wall heat flux and temperature profiles show very complicated variation behaviors.The wall heat flux can have multiple poles under certain given controlling parameters,and the temperature can have significant oscillations with overshoot and negative values in the boundary layers.The relationship between the number of poles in the wall heat flux and the number of zero-crossing points is identified.The difference in the results of the prescribed wall temperature case and the prescribed wall heat flux case is analyzed.Results given in this paper provide a rare closed form analytical solution to the entire unsteady NS equations,which can be used as a benchmark problem for numerical code validation.     

D-T中子活化实验中89Rb半衰期的实验测量研究

加速器中子活化实验是核专业本科实验教学中的重要实验之一.本文在利用14 MeV快中子辐照238U诱发裂变截面实验过程中引导学生挖掘实验数据,测量了裂变核素(89Rb)的重要核参数—半衰期.本工作运用低本底HPGe-γ谱仪测定裂变产物的一系列γ射线能谱,解谱得到89Rb的特征γ峰计数,从而确定89Rb的半衰期.数据分析中应用89Rb核素两条γ射线分别独立得到89 Rb的半衰期为15.30±0.09 min和15.25±0.07 min.测量结果在与文献数据符合较好的基础上,提高了测量精度.     

人造金刚石的微观结构模型

将静态超高压高温合成的人造金刚石晶粒利用RTO包埋法制备成适合TEM观察的样品,发现这些金刚石晶粒是由多根细长的纳米多晶棒沿一定取向规则地以捆束状堆叠、聚集而成,而这些纳米多晶棒之间填充了无定型碳.也就是说,人造金刚石晶粒是由结晶碳素和无定型碳组成的.由此,提出并绘制了人造金刚石晶粒的微观结构模型示意图,可用于解释人造金刚石的各向异性及其他宏观性能特征.在以上结论的基础上,笔者认为业界经常提及的“单晶”金刚石称谓可能并不严谨,可能并不是纯粹由结晶金刚石材料组成.     

基于改进格林元的压裂水平井动态分析方法

以建立高效的动态分析方法为出发点，以边单元作为求解点，改进传统的格林元方法，减少未知数和求解矩阵维度；并提出基于改进格林元的加密网格加密方法，保证考虑复杂裂缝网络的压裂水平井动态模拟的早期精度.退化模型与半解析解、数值模拟结果进行对比，验证本文基于加密网格的改进格林元方法的准确性和动态分析的高效性.最后进行动态响应的敏感性分析，结果表明：①格林元方法是一种高精度的动态模拟方法，将求解节点设置在网格的边上可以提高压裂水平井动态模拟的速度；②改进格林元方法的加密基于叠加原理，不需要通过插值近似，其求解精度高.在相同加密网格条件下，基于本文改进格林元方法的加密效果比有限差分加密效果更佳；③复杂裂缝导流能力、改造区渗透率提高倍数、改造区大小等参数对压裂水平井动态特征影响较大，在动态分析和参数反演时，应着重考虑这些因素的影响.     

ON THE EXISTENCE OF LOCAL CLASSICAL SOLUTION FOR A CLASS OF ONE-DIMENSIONAL COMPRESSIBLE NON-NEWTONIAN FLUIDS

In this paper, the aim is to establish the local existence of classical solutions for a class of compressible non-Newtonian fluids with vacuum in one-dimensional bounded intervals, under the assumption that the data satisfies a natural compatibility condition. For the results, the initial density does not need to be bounded below away from zero.     

Atomic-scale simulations for lithium dendrite growth driven by strain gradient

Dendrite formation is a major obstacle, e.g., capacity loss and short circuit, to the next-generation high-energy-density lithium (Li)-metal batteries. The development of successful Li dendrite mitigation strategies is impeded by an insufficient understanding in Li dendrite growth mechanisms. The Li-plating-induced internal stress in Li-metal and its effects on dendrite growth have been widely studied, but the underlying microcosmic mechanism is elusive. In the present study, the role of the plating-induced stress in dendrite formation is analyzed through first-principles calculations and ab initio molecular dynamic (AIMD) simulations. It is shown that the deposited Li forms a stable atomic nanofilm structure on the copper (Cu) substrate, and the adsorption energy of Li atoms increases from the Li-Cu interface to the deposited Li surface, leading to more aggregated Li atoms at the interface. Compared with the pristine Li-metal, the deposited Li in the early stage becomes compacted and suffers the in-plane compressive stress. Interestingly, there is a giant strain gradient distribution from the Li-Cu interface to the deposited Li surface, making the deposited atoms adjacent to the Cu surface tend to press upwards with perturbation and causing the dendrite growth. This provides an insight into the atomicscale origin of Li dendrite growth, and may be useful for suppressing the Li dendrite in Li-metal-based rechargeable batteries.     

地磁对γγ方向角关联测量的影响

在γ-γ角关联实验中,发现能谱中全能峰的位置随探头方位角的改变而变化。本文通过不同的实验,验证了地磁对能谱测量的干扰以及对γ-γ方向角关联测量的影响。发现地磁对测量的影响主要来自光电倍增管,地磁方向与光电倍增管中电子飞行方向的夹角的改变,引起光电倍增管增益变化,最终给γ-γ方向角关联测量带来较大的影响。文中总结了如何减小地磁影响,改进γ-γ方向角关联实验测量的方法。     

考虑塑性变形发展程度系数的RC梁开裂弯矩改进计算公式

针对RC梁开裂荷载计算方法尚未统一的现状，首先，结合18根RC梁试验数据对比了已有的6种RC梁开裂弯矩计算公式，发现开裂弯矩理论计算值与试验值的偏差大小和混凝土强度有关；然后，通过提出塑性变形发展程度系数k，推导新的RC梁开裂弯矩计算公式，并进一步基于k值和塑性影响系数计算值γ_k进行改进；最后，选取12根RC试验梁验证改进公式的准确性，证明改进公式的计算值与试验值吻合更好且偏于安全。